Gmar Cheshbon
Recuperation

Recuperation pay: how to check you got all the days

One line on the payslip that is easy to miss. Here is how to check whether it is right — how many days, and at what job scope.

Reading time: about 3 minutes

In brief
  • Entitlement begins after a year of work, and the number of days rises with seniority. The daily rate is updated.
  • Under the general extension order in the private sector: 5 recuperation days in the first year, and up to 10 days from the 20th year of work. In 2024 and 2025 one recuperation day was cut by law (for low wages — half a day).
  • Part-time, temporary and hourly workers are also entitled to their statutory rights, in proportion to the scope of their work. Some rights have a threshold condition — for example, a year of work for severance pay.

What is recuperation pay

Entitlement begins after a year of work, and the number of days rises with seniority. The daily rate is updated.

In other words, there are two numbers to check here: how many recuperation days, and at what rate.

Under the general extension order in the private sector: 5 recuperation days in the first year, and up to 10 days from the 20th year of work. In 2024 and 2025 one recuperation day was cut by law (for low wages — half a day).

These are the rules of the general extension order in the private sector. The check also looks at the rules of your sector, if there are any.

And what about part-time work?

Part-time, temporary and hourly workers are also entitled to their statutory rights, in proportion to the scope of their work. Some rights have a threshold condition — for example, a year of work for severance pay.

An example in numbers

Suppose you have completed your first year of work, in a 50% position.

  • Recuperation days for the first year5 days
  • According to job scope5 × 50%2.5 days
  • Recuperation days to be paid2.5 days

The number of days is multiplied by the daily rate. We deliberately did not write the amount in shekels here: in the check it is calculated at the correct rate.

Another example: if every year you were paid half a day less than the calculation, after 4 years you are missing 2 whole recuperation days (4 × 0.5 = 2).

What it looks like on the payslip

The payslip usually has a line called “recuperation” or “recuperation pay” (הבראה, דמי הבראה). Sometimes it shows a number of days and a rate, and sometimes only an amount.

Some employers pay recuperation once a year, and some split it into a small payment every month. When the payment is monthly, it is hard to see whether the full amount for the year arrived. So you add up all the payments for that year and compare them with the calculation.

Days first, then shekels

When checking recuperation pay, you start with the number of days, and only then move on to shekels. The reason is simple: a mistake in the number of days repeats itself every year. Half a day missing in one year turns, after a few years, into several whole days — as in the example above.

Pay special attention to years in which your seniority went up, or your job scope changed. Those are the moments when it is easiest to miss something.

I only got recuperation pay in some of the years

This, too, is checked year by year: when each year of work was completed, how many days the calculation gives for that year, and what was actually paid. A year that is missing entirely is easy to spot. A year that was only partly paid is harder to see — which is why all the payslips for that year are reviewed, not just the month in which the line appeared.

And at the end of employment?

At the end of employment you are also entitled to a proportional part of recuperation pay for the last year (once the first year of work has been completed). Recuperation pay that was not paid can be claimed even after employment ends, subject to the limitation period.

That is why recuperation pay is also checked at the end of employment: how much was paid each year, and what is still open. It is part of the check in every final settlement.

Limitation period: what you should know

Most wage rights become time-barred after 7 years, and each month is counted separately. Some rights become time-barred sooner (for example, payment for unused leave), and contacting the employer alone does not stop the clock. With every month that passes, the oldest month may fall outside the limitation period. And whoever checks early finds the payslips much more easily.

How to check it yourself

  1. On every payslip, look for a line called “recuperation” or “recuperation pay”.
  2. Write down for each year: how many days were paid, and in what amount.
  3. Is the payment spread over all the months? Add up all the payments for that year.
  4. Write down how many years of seniority you had in each year. The number of days rises with seniority.
  5. Part-time? Multiply the number of days by your job percentage.
  6. Compare what was paid with what the calculation gives. Something missing? Write down the year and the gap.

Not sure you got all your recuperation days?

The full check examines each year separately: how many days, at what rate, and at what job scope. A clear report, one price: ₪999 incl. VAT. Want to see first whether there are warning signs? The quick check takes a minute.

This information is general and does not constitute legal advice. The rights in each case depend on the circumstances, the sector and the agreements that apply to it.

Order a check · ₪999or 3 × ₪333Quick check